New
Dime Bag Skateboard Mounting Hardware 1" Phillips Red Nuts and Bolts
SKU: DB-AN-HW-RED-1
Description
Colorize your set up with Dimebag hardware 1" Phillips Mounting Nuts and Bolts. Use this nut and bolt combo to mount skateboard trucks to a skateboard deck.
This Phillips head hardware is anodized. Anodizing converts the outer layer of metal into a hard oxide coating which increases scratch resistance, improves corrosion resistance, and helps the hardware survive moisture and dirt, all while locking the color into the metal.
This hardware uses nylon-insert lock nuts which prevent loosening during riding. The nylon allows the threads on the bolt to grip and stay tight while your board is riding over both smooth or rough surfaces. The nuts are also made using the anodizing surface treatment process.
Using the shoulder bolt concept, the bolts are not fully threaded to the top so there is less wear and tear on your deck holes (The bolt fits snugly and have less vibration, which keeps the nuts from loosening and makes the bolts and the board last longer.)
1" hardware is designed for standard 7-Ply boards and standard trucks with 1/8" risers or without risers. 1" Hardware is the most common size for skateboards because it is versatile and works on many standard configurations without being too long or too short.
Includes: 8 1" Phillips Head Shoulder Bolts8 Lock Nuts
This Phillips head hardware is anodized. Anodizing converts the outer layer of metal into a hard oxide coating which increases scratch resistance, improves corrosion resistance, and helps the hardware survive moisture and dirt, all while locking the color into the metal.
This hardware uses nylon-insert lock nuts which prevent loosening during riding. The nylon allows the threads on the bolt to grip and stay tight while your board is riding over both smooth or rough surfaces. The nuts are also made using the anodizing surface treatment process.
Using the shoulder bolt concept, the bolts are not fully threaded to the top so there is less wear and tear on your deck holes (The bolt fits snugly and have less vibration, which keeps the nuts from loosening and makes the bolts and the board last longer.)
1" hardware is designed for standard 7-Ply boards and standard trucks with 1/8" risers or without risers. 1" Hardware is the most common size for skateboards because it is versatile and works on many standard configurations without being too long or too short.
Includes: 8 1" Phillips Head Shoulder Bolts
Description
Colorize your set up with Dimebag hardware 1" Phillips Mounting Nuts and Bolts. Use this nut and bolt combo to mount skateboard trucks to a skateboard deck.
This Phillips head hardware is anodized. Anodizing converts the outer layer of metal into a hard oxide coating which increases scratch resistance, improves corrosion resistance, and helps the hardware survive moisture and dirt, all while locking the color into the metal.
This hardware uses nylon-insert lock nuts which prevent loosening during riding. The nylon allows the threads on the bolt to grip and stay tight while your board is riding over both smooth or rough surfaces. The nuts are also made using the anodizing surface treatment process.
Using the shoulder bolt concept, the bolts are not fully threaded to the top so there is less wear and tear on your deck holes (The bolt fits snugly and have less vibration, which keeps the nuts from loosening and makes the bolts and the board last longer.)
1" hardware is designed for standard 7-Ply boards and standard trucks with 1/8" risers or without risers. 1" Hardware is the most common size for skateboards because it is versatile and works on many standard configurations without being too long or too short.
Includes: 8 1" Phillips Head Shoulder Bolts8 Lock Nuts
This Phillips head hardware is anodized. Anodizing converts the outer layer of metal into a hard oxide coating which increases scratch resistance, improves corrosion resistance, and helps the hardware survive moisture and dirt, all while locking the color into the metal.
This hardware uses nylon-insert lock nuts which prevent loosening during riding. The nylon allows the threads on the bolt to grip and stay tight while your board is riding over both smooth or rough surfaces. The nuts are also made using the anodizing surface treatment process.
Using the shoulder bolt concept, the bolts are not fully threaded to the top so there is less wear and tear on your deck holes (The bolt fits snugly and have less vibration, which keeps the nuts from loosening and makes the bolts and the board last longer.)
1" hardware is designed for standard 7-Ply boards and standard trucks with 1/8" risers or without risers. 1" Hardware is the most common size for skateboards because it is versatile and works on many standard configurations without being too long or too short.
Includes: 8 1" Phillips Head Shoulder Bolts