OJ Wheels Juice Bar Skateboard Rails Green 14" 5-Hole Design (PAIR)
by
OJ Wheels
SKU: OJ502 x2
Description
OJ Wheels Juice Bar Rails in Green use super juicy Nylon 66 in a square, angled profile with rounded corners, ready to slide on anything you can get on top of. Green stands out against most deck bottoms.
Each rail is about 14" long, 11/16" wide, and 5/16" to 3/8" tall, with a 5-hole mounting pattern. You get a pair.
Who OJ Juice Bar Green Rails Are For
- OJ Wheels fans
- Skaters who slide everything
- Anyone protecting their graphic
- Skaters who want green rails
Features
- Nylon 66 material
- Square, angled profile with rounded corners
- Approx. 14" (350 to 352 mm) long
- 11/16" (17 mm) wide, 5/16" to 3/8" tall
- 5-hole design
Benefits
- Slides on anything
- Protects your graphic
- Mounting hardware included
How to Install Rails
- Set the rails on the bottom of your deck, between the trucks and parallel to the edges. Line up both sides so they match.
- Mark each screw hole with a pencil.
- Drill shallow pilot holes with a bit slightly smaller than the screws. Wrap tape around the bit as a depth stop, and never drill through the deck.
- Drive the screws in by hand so they don't strip or split the wood.
Specs
| Brand | OJ Wheels |
| Model | Juice Bar Rails |
| Color | Green |
| Length | Approx. 14" (350 to 352 mm) |
| Width | 11/16" (17 mm) |
| Height | 5/16" to 3/8" (6 to 10 mm) |
| Hole Pattern | 5-hole |
| Material | Nylon 66 |
| Includes | 2 rails and mounting hardware |
Compare OJ Juice Bar Rails
Every Juice Bar uses the same Nylon 66 build and 5-hole design. Pick your flavor.
| Rails | Color |
|---|---|
| Juice Bar Orange | Orange |
| Juice Bar Green (this page) | Green |
| Juice Bar Purple | Purple |
FAQ
Do these come as a pair?
Yes. You get 2 rails, one for each side of your deck, plus the mounting screws.
What are Juice Bars made of?
Nylon 66.
Do I have to drill my board?
Yes, but only shallow pilot holes for the screws. Follow the install steps above, and never drill all the way through the deck.
Description
OJ Wheels Juice Bar Rails in Green use super juicy Nylon 66 in a square, angled profile with rounded corners, ready to slide on anything you can get on top of. Green stands out against most deck bottoms.
Each rail is about 14" long, 11/16" wide, and 5/16" to 3/8" tall, with a 5-hole mounting pattern. You get a pair.
Who OJ Juice Bar Green Rails Are For
- OJ Wheels fans
- Skaters who slide everything
- Anyone protecting their graphic
- Skaters who want green rails
Features
- Nylon 66 material
- Square, angled profile with rounded corners
- Approx. 14" (350 to 352 mm) long
- 11/16" (17 mm) wide, 5/16" to 3/8" tall
- 5-hole design
Benefits
- Slides on anything
- Protects your graphic
- Mounting hardware included
How to Install Rails
- Set the rails on the bottom of your deck, between the trucks and parallel to the edges. Line up both sides so they match.
- Mark each screw hole with a pencil.
- Drill shallow pilot holes with a bit slightly smaller than the screws. Wrap tape around the bit as a depth stop, and never drill through the deck.
- Drive the screws in by hand so they don't strip or split the wood.
Specs
| Brand | OJ Wheels |
| Model | Juice Bar Rails |
| Color | Green |
| Length | Approx. 14" (350 to 352 mm) |
| Width | 11/16" (17 mm) |
| Height | 5/16" to 3/8" (6 to 10 mm) |
| Hole Pattern | 5-hole |
| Material | Nylon 66 |
| Includes | 2 rails and mounting hardware |
Compare OJ Juice Bar Rails
Every Juice Bar uses the same Nylon 66 build and 5-hole design. Pick your flavor.
| Rails | Color |
|---|---|
| Juice Bar Orange | Orange |
| Juice Bar Green (this page) | Green |
| Juice Bar Purple | Purple |
FAQ
Do these come as a pair?
Yes. You get 2 rails, one for each side of your deck, plus the mounting screws.
What are Juice Bars made of?
Nylon 66.
Do I have to drill my board?
Yes, but only shallow pilot holes for the screws. Follow the install steps above, and never drill all the way through the deck.
A
Great wheels! Only been on them for a week or so skating street and slappys, but love the feel and asymmetrical edges. I have them on the Bones Reds Big Balls bearings with bearing spacers and they’re fast and smooth as heck!
